Journal of Control and Systems Engineering
Journal of Control and Systems Engineering(JCSE)

ISSN:2331-2963(Print)
ISSN:2331-2971(Online)
Website: www.bowenpublishing.com/jcse/
System Identification and Control of Underdamped System Using Dual Input Describing Function
Abstract:
An online relay test is performed to obtain process model parameters of an underdamped system with delay. Measurements made on the limit cycle response curve are used to identify the system dynamics. It is difficult to obtain the required limit cycle data during load disturbance due to the asymmetric limit cycle. A Dual Input Describing Function (DIDF) is used to extract the limit cycle data with and without load disturbances. The effectiveness of the identification technique is tested in the presence of load disturbances. A proportional-integral-derivative (PID) controller is designed for the identified underdamped system using the direct synthesis method.
Keywords:Asymmetric Limit Cycle; Dual Input Describing Function; Measurement Noise; Relay
Author: Venkata Ramana Kasi,Somanath Majhi,Anup Kumar Gogoi

References:

  1. W. L. Luyben, “Derivations of transfer functions for highly non-linear distillation columns,” Ind. Eng. Chem. Res., vol. 26, pp. 2490-2495, 1987.
  2. K. J. Åström and T. Hägglund, “Automatic tuning of simple regulators with specifications on phase and amplitude margins,” Automatica, vol. 20, iss. 5, pp. 645-651, 1984.
  3. S. Majhi, “Relay based identification of processes with time delay,” Journal of Process Control, vol. 17, pp. 93-101, 2007.
  4. J. Lee, J. S. Kim, J. Byeon, S. W. Sung, and T. F. Edgar, “Relay feedback identification for processes under drift and noisy environments,” AIChE, vol. 57, iss. 7, pp. 1809-1816, 2011.
  5. P. K. Padhy and S. Majhi, “Relay based PI-PD design for stable and unstable FOPDT processes,” Comp. Chem. Eng., vol. 30, pp. 790-796, 2006.
  6. S. Vivek and M. Chidambaram, “Identification using single symmetrical relay feedback test,” Comp. Chem. Eng., vol. 29, pp. 1625-1630, 2005.
  7. K. Srinivasan and M. Chidambaram, “Modified relay feedback method for improved system identification,” Comp. Chem. Eng., vol. 27, pp. 727-732, 2003.
  8. S. Vivek and M. Chidambaram, “An improved relay auto tuning of PID controllers for critically damped SOPDT systems,” Chemical Engg. Communications, vol. 199, pp. 1437-1462, 2012.
  9. Bajarangbali and S. Majhi, “Identification of underdamped process dynamics,” Systems Science & Control Engineering, vol. 2, pp. 541-548, 2014.
  10. S. H. Shen, J. S. Wu, and C. C. Yu, “Autotune identification under load disturbance,” Ind. Eng. Chem. Res., vol. 35, pp. 1642-1651, 1996.
  11. R. C. Panda, “Estimation of parameters of under-damped second order plus dead time processes using relay feedback,” Comp. Chem. Eng., vol. 30, pp. 832-837, 2006.
  12. Y. W. Choe and H. K. Lee, “Periodic disturbance cancellation by using dual-input describing function (DIDF) method,” Control and Automation Conf., pp. 1986-1991, Dec. 2009.
  13. A. Gelb and W. E. Vander Velde, Multiple-Input Describing Functions and Nonlinear System Design, New York: Mc-Graw-Hill, 1968.
  14. D. Chen and Sebor, “PI/PID controller design based on direct synthesis and disturbance rejection,” Ind. Eng. Chem. Res., vol. 41, pp. 4807-4822, 2002.
  15. K. Lavanya, B. Umamaheswari, and R. C. Panda, “Identification of second order plus dead time systems using relay feedback test,” Indian Chemical Engineer, vol. 48, pp. 94-102, 2006.